220R LOADER
Loader
- Compatible with 2032R and 2038R tractors
- Quik-Park™ mounting system for easy on, easy off in minutes
- Optional single-point hydraulic coupler lets you connect the hydraulics in one click, no fuss and no mess
- Quik-Change bucket system allows fast attachment changeovers for moving from chore to chore
View Product Brochure
Features
Pivot pinThe unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Quik-Park loader mounting system
Quik-Park loader mounting systemThe 220R Loader is designed for easy removal/mounting to/from the tractor without tools.
The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.
To view a video of how the Quik-Park system works, click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
Specifications
| Technical drawing | 220r-loader Current Model |
|---|---|
| Tractor | |
| Model | 2032R, 2038R |
| Front tire | 23x8.50-14 4PR R4 |
| Rear tire | 14-17.5 6PR R4 |
| Front axle configuration | |
| Wheelbase | 1725 mm 68 in. |
| Pump capacity | 20.2 L/min 5.3 gpm |
| Rated pressure | 17.23 MPa 2499 psi |
| Loader | |
| Leveling configuration | Non-Self Leveling |
| Bucket used | 1450 mm 57 in. |
| Bucket weight | 88 kg 194 lb |
| Lift capacity at full height | Measured at pivot (U) 509 kg 1120 lb Measured at 500 mm ahead of pivot (V) 365 kg 803 lb |
| Lift capacity at 59 in. (1500 mm) | Measured at pivot (W) 589 kg 1296 lb Measured at 500 mm ahead of pivot (X) 445 kg 979 lb |
| Boom breakout force | Measured at pivot (Y) 886 kgf 1949 lbf Measured at 500 mm ahead of pivot (Z) 618 kgf 1360 lbf |
| Bucket rollback force capacity | At maximum height (VV) 1044 kgf 2297 lbf At 59-in. (1500-mm) lift height (XX) 1302 kgf 2864 lbf At ground-level line (ZZ) 972 kgf 2138 lbf |
| Dimensions | Maximum lift height (A) 2160 mm 85 in. At full height - bucket level(B) 1999 mm 79 in. At full height - bucket dumped (C) 1667 mm 66 in. |
| Overall length (I+F), ft (m) | 3076 mm 121 in. |
| Overall height in carry position (J) | |
| Digging depth (H) | 149 mm 6 in. |
| Reach | At maximum height (D) 756 mm 30 in. At ground level - bucket level (F) 1351 mm 51 in. |
| Bucket angle | Dump angle, degrees (E) 36 degree (angle) Rollback angle, degrees (G) 34 degree (angle) Dump angle, ground 115 degree (angle) |
| Cycle times | Loader raise, seconds 3.19 seconds Loader lower, seconds 1.94 seconds Bucket dump, seconds 4.76 seconds Bucket rollback, seconds 2.91 seconds |