RB2409
Rear Blades
- Frame's tubular steel is crafted for tough jobs
- Manually adjustable angle
- Reversible cutting edge
- Optional end plates
View Product Brochure
Features
Tubular steel frameThe tough, tubular steel frame on Frontier™ RB Series Rear Blades is perfect for grading. Its full-radius moldboard more than handles landscaping needs.
NOTE: This applies to all RB Series Frame except the RBL Series.
Hitch on RB23 and RB24 Series Rear BladesThe Frontier™ RB23 and RB24 Series Rear Blades are Quik-Coupler compatible with Category 2 hitches, allowing a quick, efficient hookup.
Adjustable turntable for 360-degree turning radiusThe turntable on the Frontier™ RB22, RB23, and RB24 Series Rear Blades allows a complete 360-degree turning radius for leveling perfection.
Manually adjusting the offset, angle, and tilt allows the blade to adapt to a variety of conditions and provides added protection and leveling perfection.
Frontier™ rear blade cutting edgeAll Frontier RB Series Rear Blade cutting edges are reversible, featuring bevels on both edges to give the blade twice the work life.
RB21 Series Rear Blade shown aboveEnd plates allow Frontier™ RB Series Rear Blades to hold extra material while dragging it from place to place. This is ideal for leveling uneven terrain.
RB Series skid shoes avoid work-surface damageSkid shoes increase the life of the cutting edge on all RB Series Rear Blades and avoid damaging the work surface while cleaning corrals or plowing snow.
NOTE: Skid shoe style shown in image above used with RB2060, RB2072, and RB2084 models.
Each of the field conversion kits listed are for a pair of end plates for rear blades and are ideal to keep from windrowing material when backfilling or leveling.
The kits and their associated rear blades are identified below.
The field-conversion hydraulic cylinder kit includes one cylinder. This kit allows the operator to position the blade without having to get off of the operator's station.
NOTE: A rear selective control valve (SCV) is required.
The skid shoe kits include one pair and allow the blade to ride on the shoes at a set height to allow the operator control of the blade depth.
The bundles listed below identify the rear blades they fit.
The tailwheel assembly allows the operator to adjust how low they want the blade when leveling and backfilling.
Specifications
| Dimensions | RB2409 Current Model |
|---|---|
| Width in working position | 2.4 m 8 ft |
| Moldboard length | 243.8 cm 96 in. |
| Moldboard height | 48.3 cm 19 in. |
| Moldboard thickness | 0.8 cm 0.3125 in. |
| Weight | |
| Machine | 658.2 kg 1,451 lb |
| Shipping per unit | 704.9 kg 1,554 lb |
| Tractor requirements | |
| PTO hp (kW) | Maximum: 2WD: 119.3 kW 160 hp Maximum: 4WD: 108.1 kW 145 hp |
| Hydraulic offset kit (hoses and fittings included) | Standard, manual offset and tilt require one hydraulic remote |
| Angle, tilt, offset, pivot | |
| Pivot angle degrees | 360 degree (angle) |
| Angle forward, number of positions | Four positions right, up to 26 degree (angle) Five positions left, up to 38 degree (angle) |
| Angle reverse, number of positions | Four positions right, up to 26 degree (angle) Five positions left, up to 38 degree (angle) |
| Tilt positions/degrees | Two positions up and down, up to 15 degree (angle) up and down |
| Offset position left or right | 0 to 91.44 cm 0 to 36 in. |
| Hitch | |
| Type | Category 2, Category 3 |
| Quick hitch compatibility | ASAE Category 2 and 3 quick coupler |
| Reversible cutting edge | |
| Thickness | 1.3 cm 0.5 in. |
| Height | 15.2 cm 6 in. |
| Duty | |
| Parking stand | |
| Set-up time | |
| Warranty | |
| Key Specs | |
| Angle forward, number of positions | |
| Angle reverse, number of positions | |
| Hitch | |
| PTO hp (kW) | |
| Pivot angle degrees | |
| Width in working position |