6135E UTILITY TRACTOR

Overview:

In certain applications there are some specific lighting needs. Lighting attachments available for the 6E, including various additional working lights and beacon lights.

Auxiliary cab working lights

Auxiliary work light kit (2) on rear of a 6E Cab Tractor

Round-halogen lights are roof mounted for additional lighting on the front and/or rear of a cab tractor. Each auxiliary work light kit contains lighting for the front or rear; two kits must be ordered for both front and rear lighting.

Work lights, rear-mounted rollover protective structure (ROPS)

Additional rear-mounted ROPS work light – left-hand mounted shown

For operators wanting to add a second rear light to their open operator station (OOS) tractors, adding an additional rear-mounted ROPS light (right-side mounted) provides operators with 55 W of light to the rear of the tractor for increased illumination.

Work lights, fender mounted

Work light on 6E Series Tractor

For OOS tractors, two front-facing, fender-mounted lights are available for additional illumination to the front work area. For operators wanting additional lighting for late afternoon and night work, these lights provide more light to get the job done.

Beacon light kit

Beacon light kit

The beacon light kit is for the operator who is required to meet certain requirements for government and commercial applications. The kit consists of a rotating, high-intensity light that rests inside an amber-colored safety lens. A cab interior roof-mounted rocker switch controls turning on and off the light.

Engine manifold heater

The engine manifold heater heats up the engine air intake to assist with cold-weather starting. To engage, turn the ignition key to the left and hold for 20 seconds.

Engine block heater - 110 volts

The engine block heater heats up the engine coolant surrounding the engine block. The engine block heater, 110 volts, needs to be plugged into an electrical circuit to be activated. The coolant is pre-warmed prior to the tractor starting, and this fluid warms the engine block to assist in cold weather starting.

Front weight support for carrying Quik-Tatch weights

Front weight support for 6E Tractors

For operators needing front ballast for heavy rear implements, a front weight support will hold up to 18 Quik-Tatch weights to help provide additional weight at the front end of the tractor to increase traction and stability.

Rear wheel weights

Rear-wheel weight

Cast-iron wheel weights provide added ballast at the tires for increased traction and stability.

Reference the rear-wheel weight compatibility chart before ordering weights for 6030, 7130-7230, 6030 Premium, 6D and 6E Premium Series Tractors.

Front Quik-Tatch weights

Front weight support and Quik-Tatch weights

Each Quik-Tatch weight weighs 43 kg (95 lb) and fits on the front weight bracket. Ballasting requirements for each tractor are found in the operator's manual.

Quik-Couplers

Quik-Coupler

Hitch/coupler allows for quick, no-hassle hookups to many popular integral implements.

Features include:

• Tubular and box-welded steel construction.
• Heat-treated bushings to prevent cracking and breakage.
• Heat-treated hooks for long wear life.
• Locking handles rotate 100 degrees to open the locking lugs for easy implement release.
• Hardened and zinc-plated steel alloy pins to take the shock of heavy loads and withstand exposure to the elements.

Overview

There are several hydraulic attachment kits available to further enhance the capabilities of the 6E Tractors.

Benefits:

• SCV kits expand the tractor to be loader ready
• Oil collection system decreases potential hydraulic spills while disconnecting rear SCV lines.
• Hydraulic motor return recommended for usage with hydraulic motors that are susceptible to damage if return coupler flow checks.

Details:

• SCV kits allow tractors to be configured to a loader requiring two or three function controls
• The hydraulic motor return oil kit allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit.

Hydraulic motor return

BSJ10116 installed location

Hydraulic motor return

Oil collection system

BSJ10212 installation location

Oil collection system

Dual-function mid-SCV to triple-function mid-SCV

BSJ10218 installation location

Dual-function mid-SCV to triple-function mid-SCV

Triple deluxe selective control valve kit

BSJ10220 installation location

Overview

There are several hydraulic attachment kits available to further enhance the capabilities of the 6E Tractors.

Benefits:

• SCV kits expand the tractor to be loader ready
• Oil collection system decreases potential hydraulic spills while disconnecting rear SCV lines.
• Hydraulic motor return recommended for usage with hydraulic motors that are susceptible to damage if return coupler flow checks.

Details:

• SCV kits allow tractors to be configured to a loader requiring two or three function controls
• The hydraulic motor return oil kit allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit.

Hydraulic motor return

BSJ10116 installed location

Hydraulic motor return

Oil collection system

BSJ10212 installation location

Oil collection system

Dual-function mid-SCV to triple-function mid-SCV

BSJ10218 installation location

Dual-function mid-SCV to triple-function mid-SCV

Triple deluxe selective control valve kit

BSJ10220 installation location

Overview:

In certain applications there are some specific lighting needs. Lighting attachments available for the 6E, including various additional working lights and beacon lights.

Auxiliary cab working lights

Auxiliary work light kit (2) on rear of a 6E Cab Tractor

Round-halogen lights are roof mounted for additional lighting on the front and/or rear of a cab tractor. Each auxiliary work light kit contains lighting for the front or rear; two kits must be ordered for both front and rear lighting.

Work lights, rear-mounted rollover protective structure (ROPS)

Additional rear-mounted ROPS work light – left-hand mounted shown

For operators wanting to add a second rear light to their open operator station (OOS) tractors, adding an additional rear-mounted ROPS light (right-side mounted) provides operators with 55 W of light to the rear of the tractor for increased illumination.

Work lights, fender mounted

Work light on 6E Series Tractor

For OOS tractors, two front-facing, fender-mounted lights are available for additional illumination to the front work area. For operators wanting additional lighting for late afternoon and night work, these lights provide more light to get the job done.

Beacon light kit

Beacon light kit

The beacon light kit is for the operator who is required to meet certain requirements for government and commercial applications. The kit consists of a rotating, high-intensity light that rests inside an amber-colored safety lens. A cab interior roof-mounted rocker switch controls turning on and off the light.

Overview

There are several hydraulic attachment kits available to further enhance the capabilities of the 6E Tractors.

Benefits:

• SCV kits expand the tractor to be loader ready
• Oil collection system decreases potential hydraulic spills while disconnecting rear SCV lines.
• Hydraulic motor return recommended for usage with hydraulic motors that are susceptible to damage if return coupler flow checks.

Details:

• SCV kits allow tractors to be configured to a loader requiring two or three function controls
• The hydraulic motor return oil kit allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit.

Hydraulic motor return

BSJ10116 installed location

Hydraulic motor return

Oil collection system

BSJ10212 installation location

Oil collection system

Dual-function mid-SCV to triple-function mid-SCV

BSJ10218 installation location

Dual-function mid-SCV to triple-function mid-SCV

Triple deluxe selective control valve kit

BSJ10220 installation location

Overview

There are several hydraulic attachment kits available to further enhance the capabilities of the 6E Tractors.

Benefits:

• SCV kits expand the tractor to be loader ready
• Oil collection system decreases potential hydraulic spills while disconnecting rear SCV lines.
• Hydraulic motor return recommended for usage with hydraulic motors that are susceptible to damage if return coupler flow checks.

Details:

• SCV kits allow tractors to be configured to a loader requiring two or three function controls
• The hydraulic motor return oil kit allows coupling of the oil return line of a hydraulic motor into a pressure-free circuit.

Hydraulic motor return

BSJ10116 installed location

Hydraulic motor return

Oil collection system

BSJ10212 installation location

Oil collection system

Dual-function mid-SCV to triple-function mid-SCV

BSJ10218 installation location

Dual-function mid-SCV to triple-function mid-SCV

Triple deluxe selective control valve kit

BSJ10220 installation location

Engine manifold heater

The engine manifold heater heats up the engine air intake to assist with cold-weather starting. To engage, turn the ignition key to the left and hold for 20 seconds.

Engine block heater - 110 volts

The engine block heater heats up the engine coolant surrounding the engine block. The engine block heater, 110 volts, needs to be plugged into an electrical circuit to be activated. The coolant is pre-warmed prior to the tractor starting, and this fluid warms the engine block to assist in cold weather starting.

Front weight support for carrying Quik-Tatch weights

Front weight support for 6E Tractors

For operators needing front ballast for heavy rear implements, a front weight support will hold up to 18 Quik-Tatch weights to help provide additional weight at the front end of the tractor to increase traction and stability.

Rear wheel weights

Rear-wheel weight

Cast-iron wheel weights provide added ballast at the tires for increased traction and stability.

Reference the rear-wheel weight compatibility chart before ordering weights for 6030, 7130-7230, 6030 Premium, 6D and 6E Premium Series Tractors.

Front Quik-Tatch weights

Front weight support and Quik-Tatch weights

Each Quik-Tatch weight weighs 43 kg (95 lb) and fits on the front weight bracket. Ballasting requirements for each tractor are found in the operator's manual.

Lockable engine side shields

Lockable hood latch

Lockable transmission oil filler cap

Lockable fuel cap

Vandal protection package is ideal for governmental bid tractors or operators requiring the ability to secure the tractor.

Custom key door locks

Custom key door lock kit

Field-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.

Wiper kit on 5025 Series Cab Tractor

The rear wiper provides better rear visibility during inclement weather. The kit also features a wiper nozzle that disperses fluid to clean the window.

Radio

John Deere radio packages provide powerful performance with standard four-speaker systems. The standard radio package features easy-to-use operator controls located on the CommandCenter™ display and at the radio faceplate. AM/FM and weatherband tuner allows operators to stay tuned to their favorite radio stations and keep current with ever-changing weather patterns. An auxiliary input for connecting an external media source is conveniently located on the right-side console.

The premium radio package adds to these great features with Bluetooth® to connect with compatible media devices and a USB input for connecting external media sources. A subwoofer is also available in this package to increase the operator experience within the cab.

Both radio packages help create a comfortable operator environment for long hours in the cab.

Standard radio package

• AM/FM and weatherband tuner (NOAA broadcast channels)
• External antenna
• Remote controls through the CommandARM™ controls (volume, mute, channel up/down)
• CommandCenter display with station selection, volume level, and station presets
• Auxiliary input (3.5 mm [0.14 in.]) on right-side console
• Four coaxial speakers

Premium radio package*

• AM/FM, weatherband (NOAA broadcast channels), and worldwide premium tuner
• External antenna
• Remote controls through CommandARM (volume, mute, channel up/down)
• CommandCenter display with station selection, volume level, and station presets
• Universal serial bus (USB) input
• Auxiliary input on right-side console
• Bluetooth capable with microphone (allows phone and streaming audio)
• Four coaxial speakers
• Subwoofer

*XM Satellite functionality for premium radio needs to be upgraded by purchasing the XM antenna, XM receiver, brackets, and wiring harnesses via a kit from your local John Deere dealer.

Radio controls

Bosch is a trademark of Robert Bosch GmBH. Bluetooth is a trademark of Bluetooth SIG Incorporated. XM is a trademark of XM Satellite Radio Incorporated. Delco is a trademark of General Motors LLC.

ROPS-mounted canopy for open-station tractors

Canopy mounts to the top ROPS bar

The ROPS-mounted canopy can be installed to provide shade and comfort to the operator. The canopy includes four flashing roof lights. Available by field installation only.

When ordering the canopy, the wiring harness is also required to connect the lights.

Antenna mounted to 5025 Series Cab Tractor

An antenna kit is required when installing a radio in a cab tractor. The antenna kit includes a template and assembly instructions. Most cabs are radio ready, including the radio wiring harness and speakers as standard equipment.

Check the tractor's operator's manual or the sales manual to determine if the cab is ready or if additional parts are needed to install the radio.

Radio

John Deere radio packages provide powerful performance with standard four-speaker systems. The standard radio package features easy-to-use operator controls located on the CommandCenter™ display and at the radio faceplate. AM/FM and weatherband tuner allows operators to stay tuned to their favorite radio stations and keep current with ever-changing weather patterns. An auxiliary input for connecting an external media source is conveniently located on the right-side console.

The premium radio package adds to these great features with Bluetooth® to connect with compatible media devices and a USB input for connecting external media sources. A subwoofer is also available in this package to increase the operator experience within the cab.

Both radio packages help create a comfortable operator environment for long hours in the cab.

Standard radio package

• AM/FM and weatherband tuner (NOAA broadcast channels)
• External antenna
• Remote controls through the CommandARM™ controls (volume, mute, channel up/down)
• CommandCenter display with station selection, volume level, and station presets
• Auxiliary input (3.5 mm [0.14 in.]) on right-side console
• Four coaxial speakers

Premium radio package*

• AM/FM, weatherband (NOAA broadcast channels), and worldwide premium tuner
• External antenna
• Remote controls through CommandARM (volume, mute, channel up/down)
• CommandCenter display with station selection, volume level, and station presets
• Universal serial bus (USB) input
• Auxiliary input on right-side console
• Bluetooth capable with microphone (allows phone and streaming audio)
• Four coaxial speakers
• Subwoofer

*XM Satellite functionality for premium radio needs to be upgraded by purchasing the XM antenna, XM receiver, brackets, and wiring harnesses via a kit from your local John Deere dealer.

Radio controls

Bosch is a trademark of Robert Bosch GmBH. Bluetooth is a trademark of Bluetooth SIG Incorporated. XM is a trademark of XM Satellite Radio Incorporated. Delco is a trademark of General Motors LLC.

Rear fender extension on 5020 Series Tractor

Protects the operator from debris.

Modulation knob

Change the transition speed of the PowrReverser transmission with a simple dial located near the steering column. This knob is used to adjust modulation sensitivity.

Adjust the aggressiveness of the forward to reverse transition, for either a quick fast transition or a smoother, slower transition.

Front weight support for carrying Quik-Tatch weights

Front weight support for 6E Tractors

For operators needing front ballast for heavy rear implements, a front weight support will hold up to 18 Quik-Tatch weights to help provide additional weight at the front end of the tractor to increase traction and stability.

Rear wheel weights

Rear-wheel weight

Cast-iron wheel weights provide added ballast at the tires for increased traction and stability.

Reference the rear-wheel weight compatibility chart before ordering weights for 6030, 7130-7230, 6030 Premium, 6D and 6E Premium Series Tractors.

Front Quik-Tatch weights

Front weight support and Quik-Tatch weights

Each Quik-Tatch weight weighs 43 kg (95 lb) and fits on the front weight bracket. Ballasting requirements for each tractor are found in the operator's manual.

Front weight support for carrying Quik-Tatch weights

Front weight support for 6E Tractors

For operators needing front ballast for heavy rear implements, a front weight support will hold up to 18 Quik-Tatch weights to help provide additional weight at the front end of the tractor to increase traction and stability.

Rear wheel weights

Rear-wheel weight

Cast-iron wheel weights provide added ballast at the tires for increased traction and stability.

Reference the rear-wheel weight compatibility chart before ordering weights for 6030, 7130-7230, 6030 Premium, 6D and 6E Premium Series Tractors.

Front Quik-Tatch weights

Front weight support and Quik-Tatch weights

Each Quik-Tatch weight weighs 43 kg (95 lb) and fits on the front weight bracket. Ballasting requirements for each tractor are found in the operator's manual.