×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

6110M UTILITY TRACTOR

Utility Tractor

  • 110-hp John Deere FT4 PowerTech™ engine
  • Available in cab or open-station configuration
  • Standard 21-GPM pressure-compensated hydraulics; 30-GPM pressure-flow compensated system available
  • Choose from a range of available transmissions

View Product Brochure



Features



6120M standard cab with Compact CommandARM™ console6120M standard cab with Compact CommandARM™ console

The 6M Tractor was designed to ensure maximum maneuverability, visibility, and superior comfort for operators’ working long days. The 6110M and 6120M, with the updated sloped-down hood design, feature a 17.8-cm (7-in.) shorter wheelbase (240 cm [94.5 in.]) allowing you to maneuver tight areas with no problems. Inside, the 6M cab has been designed to maximize operator comfort and visibility. All-around visibility of 310 degrees from within the cab ensures accurate tractor placement, implement hookup, and optimum tractor performance. Additionally, all 6M Tractors will come standard with a digital cornerpost display and include additional options to further improve operator satisfaction like:

  • Mechanical or electrical joystick with PowrReverser™ functionality
    • Quickly and easily change directions with the push of a button while doing loader work
  • Compact CommandARM console
    • Swivel in your seat and have all the controls at your fingertips
  • Front axle suspension
  • Panoramic roof
Panoramic roofPanoramic roof
Cornerpost displayCornerpost display
Compact CommandARMCompact CommandARM
PowrReverserPowrReverser
6120M with Intelligent Power Management6120M with Intelligent Power Management

The 6110M through 6140M Tractors come equipped with Intelligent Power Management (IPM). IPM provides a 14.9-kW (20-hp) boost for operations that use rear power take-off (PTO) in high-power applications or in transport. Benefits of IPM include improved productivity, increased acceleration, and the ability to maintain desired transport speeds. The requirements for IPM to be active include: 

  • Transport applications: The minimum ground speed where additional power begins to be applied for all models is 15 km/h (9.3 mph), assuming the engine is already fully loaded. Ramp-up to full additional power occurs as speed continues to increase.
  • PTO activation: Power must be sensed going through the PTO drive clutch by the electronic system. When using PTO-driven implements, engine power is increased gradually when ground speed exceeds 1 km/h (0.6 mph) if the electronic system detects a correspondingly high PTO power requirement. Full power becomes available from a speed of 2.5 km/h (1.5 mph).
Optional electrical control valves (E-SCVs)Optional electrical control valves (E-SCVs)

All 6M models come with the option to upgrade from mechanical to electronically controlled SCVs. To control a rear implement, up to four electrical SCVs or three electrical SCVs plus power beyond can be ordered. Each SCV features four positions – neutral, raise, lower, and float. The electrical SCVs are fully adjustable with the digital cornerpost display. Additionally, you can choose what SCVs are right for your operation with the following combinations of SCVs: 

With Compact CommandARM console:

  • Up to four electrical SCVs possible or three plus power beyond
  • Loader packages with electrical joystick available
  • Mechanical SCVs are not available

With right-hand console:

  • Up to three mechanical SCVs possible plus power beyond
  • Up to four electrical SCVs possible or three plus power beyond
  • Combination of two electrical and one or two mechanical SCVs is possible
  • Loader packages with maximum of three mechanical SCVs available
  • Loader packages with electrical joystick available
6120M with optional front hitch6120M with optional front hitch

For all 6M Series Tractors, an optional integrated John Deere Category 3N front hitch with hook-end draft links can be factory installed. The high lift capacity of 4400 kg (9,700 lb) maximum and 3300 kg (7,275 lb) through the full lift range ensures compatibility with heavy front implements and ballasts. If the tractor is not equipped with Triple-Link Suspension (TLS™), an accumulator will be installed to ensure driving comfort. The economy front hitch allows:

  • Maximum uptime with quick and easy changing from folded to working position
  • The operator to be highly flexible with the front ballast
  • Optional availability of integrated front power take-off (PTO)
6155M with Premium light-emitting diode (LED) light package6155M with Premium light-emitting diode (LED) light package

Lights on the 6M Series Tractors have been positioned and designed to provide maximum visibility to the front, sides, and rear to increase productivity in any operating conditions. The updated cab lighting pattern provides 330 degrees of coverage while the hood lighting provides the remaining 30 degrees. You have two options to upgrade lighting with the Economy and Premium light packages available:

  • Economy light package
    • Two additional work lights in the front, side, and rear
  • Premium light package
    • Two additional work lights in the front, side, and rear
    • All lights are LED lights

 

Both packages require the 14-V/150-amp alternator (code 8741) and 12-V/174-amp-hr battery (code 8747).

John Deere 6155M with StarFire™ 6000 Receiver and tablet with JDLinkJohn Deere 6155M with StarFire™ 6000 Receiver and tablet with JDLink

JDLink is available from the factory for all 6M Tractors. JDLink is John Deere's telematics system connecting all machines in the field with the office and mobile devices. The technology is based on a Modular Telematics Gateway (MTG) controller that collects and transmits data via cellular network using selective data points in near real-time. Information and features can be accessed through Operations Center, the JDLink tab on MyJohnDeere.com, or by using the JDLink app. JDLink also enables you to:

  • Access important machine information like machine hours
  • Keep track of your fleets
  • Monitor work progress
  • Manage logistics
  • Analyze and optimize machine performance
  • Receive alter SMS or email messages
  • Perform remote operator support
  • Automate data exchange

 

You can choose between two subscription levels: JDLink Access and JDLink Connect.

John Deere 6155M and 835 Mower Conditioner with StarFire 6000 Receiver and JDLinkJohn Deere 6155M and 835 Mower Conditioner with StarFire 6000 Receiver and JDLink
Removable side panels for easy access on 6120MRemovable side panels for easy access on 6120M
Side panels attached to the 6120MSide panels attached to the 6120M

6M Series Tractors have been redesigned to meet stringent reliability and serviceability requirements. Daily service requirements have been reduced and are simple to accomplish with improved accessibility to the engine. All 6M models are equipped with a 60-degree hood, and the 6110M and 6120M feature removeable side panels, allowing easy access to reduce time and make serviceability even easier. These features allow you to quickly and easily check parts like:

  • Engine oil filter
  • Engine fuel filter
  • Coolant recovery tank
  • Radiator cleanout screens
  • Air cleaner

 

Additionally, the oil dipstick on the 6110M and 6120M allows you to check the engine oil level without opening the hood.

Updated oil dipstick location on 6110M-6120MUpdated oil dipstick location on 6110M-6120M
John Deere 4240 Universal DisplayJohn Deere 4240 Universal Display

The latest John Deere display technology offered in a moveable and user-friendly experience is available with the John Deere 4240 and 4640 Universal Displays. These displays enable AutoTrac™ guidance that provides enhanced usability, increased performance, and greater operator choice. Additional benefits include:

  • Support flags – document a point, line, or area of a field that needs later attention
  • Enhanced data merging functionalities for setup data (no more overwrites)
  • AutoTrac guidance improvements – boundary track and preview for guidance lines, tramlines, and machine access
  • Keeping the implement on the perfect track even in hilly conditions with AutoTrac Implement Guidance (passive)
Redesigned to improve loader operations
6120M Tractor with 600R Loader6120M Tractor with 600R Loader

The 600R Loader has been redesigned to work effortlessly with the model year 2020 6110M and 6120M Tractors. In cadence with the sloped hood design of the tractor, the 600R Loader features curved booms, making an ideal tractor-loader combination. This combination also includes a 22.9-cm (9-in.) reduction in overall machine and loader length, improving forward visibility by over 2.1-m (7 ft). Pairing the model year 2020 6110M or 6120M Tractor with the 600R Loader allows visibility directly to the loader attachment, providing more efficient performance with any loader application.

Panoramic roof for increased visibility
600R Loader through 6120M Tractor panoramic roof600R Loader through 6120M Tractor panoramic roof

As the lift height of the R-Series Loaders increases, the larger panoramic roof inside the model year 2020 6110M and 6120M Tractor cabs provides additional visibility to the entire lift cycle of the loader. The 600R Loader has a lift height up to 391.2 cm (154 in.), allowing an operator to stack three bales. With the larger panoramic roof, tasks that require maximum loader height can be performed more easily.

Light-emitting diode (LED) light option for variable operating conditions
6110M Tractor and 600R Loader with LED light package6110M Tractor and 600R Loader with LED light package

To further enhance visibility, the model year 2020 6110M/6120M Tractors and 600R Loader have the option to include LED lights. With LED lights emitting from the tractor cab and the loader boom, performing loader applications in variable operating conditions is made easier. Pairing the loader LED light option with an LED light package on the 6110M or 6120M Tractor will provide unmatched visibility to enhance operator experience during any task.

Specifications


Compare the specifications of up to 4 models

Key Specs 6110m-utility-tractor
Current Model
Engine descriptionJohn Deere PowerTech™ EWL
Engine displacement4.5 L
275 cu in.
Rated engine power110 hp
81 kW
Rated Power with IPM: 130 hp
96 kW
Maximum engine power122 hp
90 kW
w/ IPM: 134 hp
98 kW
Rated PTO power (hp SAE)62 kW
84 hp
Maximum PTO powerAt 1000 PTO rpm with IPM: 109 hp
80 kW
Transmission typeStandard: John Deere 24-speed PowrQuad™ Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad™ Plus 40 km/h
John Deere 24-speed CommandQuad™ Plus 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)
Hydraulic pump rated outputStandard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm
Rear hitch category (SAE designation)2/3N
Base machine weight5680 kg
12,522 lb
Engine specifications
DescriptionJohn Deere PowerTech EWL
Engine type
Engine family
Rated speed2100 rpm
AspirationSingle turbocharger with wastegate
Cylinders liners
Emission levelFinal Tier 4
After treatment typeDiesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhuast fluid (DEF)
Displacement4.5 L
275 cu in.
Engine performance
Rated power110 hp
81 kW
w/ IPM: 134 hp
98 kW
Rated PTO power (hp SAE)62 kW
84 hp
Maximum PTO powerAt 1000 PTO rpm with IPM: 109 hp
80 kW
Intelligent Power Management (available in transport and/or mobile PTO applications)20 hp
Power boost10 percent
Maximum engine power122 hp
90 kW
w/ IPM: 134 hp
98 kW
Engine peak torqueAt 1600 U/min: 515 Nm
379.84 lb-ft
PTO torque rise40 percent
Transmission
TypeStandard: John Deere 24-speed PowrQuad Plus 40 km/h
Optional: John Deere 16-speed PowrQuad Plus 30 km/h
John Deere 24-speed AutoQuad Plus 40 km/h
John Deere 24-speed CommandQuad Plus 40 km/h
Creeper (PowrQuad Plus and AutoQuad Plus)
ReverserElectronic left-hand reverser
Clutch; wet/dry
CreeperOptional
Hydraulic system
TypeStandard: Pressure compensated (PC)
Optional: Pressure-and-flow compensated (PFC) system with Load Sensing function
Pump rated outputStandard: 35-cc pump: 80 L/min
21 gpm
Optional: 45-cc pump: 114 L/min
30 gpm
Available flow at a single rear SCV
Available flow at front SCVs
Number of rear selective control valves (SCVs)Standard: Two ISO couplers
Optional: Two to four ISO couplers
Number of mid selective control valves (SCVs)Up to three
Number of front selective control valves (SCVs)
Joystick SCV controlMechanical/electrical
SCV control
Rear hitch
Hitch draft control load sense type
Remote control valves availableStandard
Hitch category (SAE designation)2/3N
Maximum lift capacity behind lift pointsStandard: 3750 kg
8267.3 lb
Optional: 5000 kg
11,023.1 lb
Lift capacity at standard frame
Sensing typeElectronic lower link
Rear axle differential lockElectrohydraulically with oil-cooled clutch
Drawbar
Drawbar categoryCategory 2
Maximum vertical loadRoad/field use (250-mm extended): 2000 kg
4409.2 lb
Field use (350-mm extended): 1400 kg
3086.5 lb
Field use (400-mm extended): 1200 kg
2645.5 lb
Rear power take-off (PTO)
TypeElectrohydraulically operated, oil-cooled, multi-disc design
Standard: 38 mm (1.496 in.) 540, 1000 reversible shaft
Engine rpm (at rated PTO speeds)540: 1977 rpm
1000: 1972 rpm
Multispeed PTO option availability
Ground speed PTO option availability
PTO actuationIn-cab switch and external fender-mounted remote control
Front hitch
Category3N
Electric powerSeven-pin electrical socket
Standard lift capacity4400 kg
9700.3 lb
Front power take-off (PTO)Electrohydraulically engaged with oil-cooled, multi-disc design
PTO speed1000 PTO: 1969 rpm
Rear axle
TypeStandard: flange-type rear axle
Optional: Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft (2.556-m/8.4-ft length)
Rack-and-pinion rear axle - 79-mm (3.1-in.) shaft - short version (2.286-m/7.5-ft length) mm
Final drive typeThree planetary gear reduction
Differential controls
Axle type
Brakes, type and controlPrimary brake (footbrake): Oil-cooled self-equalizing, self-adjusting, hydraulically actuated
Secondary brake: Hydraulically actuated, integrated into primary brake (lever on left-hand side of operator seat)
Park lock: Mechanical transmission park lock
Mechanical front-wheel drive (MFWD) braking: Automatic MFWD engagement (MFWD engaged for braking at speeds less than 5 km/h [3.1 mph])
Front axle brakes (optional): TLS™ with front axle brakes (oil cooled, self-equalizing, self-adjusting, hydraulically actuated)
Rear differential lockElectrohydraulically with oil-cooled clutch
Load rating
Front axle
TypeStandard: MFWD
Optional: Two-wheel drive (2WD)
Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range)
Triple-Link Suspension MFWD with brakes
Front axle differential lockSelf-locking differential
Load rating
Tires
Front540/65R24 (134)
Rear600/65R38 (175)
Wheel tread range
Turning radius with brakes
Turning radius without brakes
Tracks
Tread spacing
Drive type
Track width
Midrollers
Steering
Electrical system
Alternator sizeStandard: 14 V/120 amp
Optional: 14 V/150 amp
14 V/200 amp
Battery optionsStandard: 12 V/154 amp-hr
Optional: 12 V/174 amp-hr
Working lights
Type of bulb in headlight (Halogen, Zenon, LED)
Type of bulb in beacon (Halogen, Zenon, LED)
dB(A) rating for backup alarm
Total cold cranking amps
Operator station
Rollover protective structure, OOS
Gearshift location - console/floor
Console
Seat

Standard: Economy seat with mechanical suspension
Optional: Standard seat with air suspension
Cab suspensionOptional: Mechanical Cab Suspension (MCS)
Instructional seatOptional
DisplayCornerpost dispay (right-hand A-post)
Functionalty: Performance monitor and individual settings
RadioOptional integrated
Inner cab volume2.73 m3
96.41 cu ft
dB(A) rating70 dBA
Cab glass areaWithout roof hatch or panoramic roof: 4.85 m2
52.2 sq ft
Safety glass rating
Front visibility
Dimensions
Wheelbase2400 mm
94.5 in.
Overall length4377 mm
172.3 in.
Overall heightMinimum: 2715/2763 mm (420/85R30 (148))
106.89/108.78 in.
Maximum: 2850/2900 mm (600/65R38 (175))
112.20/114.17 in.
Drawbar clearance
Front axle centerGround clearance: Minimum: 364 mm
14.3 in.
Maximum: 559 mm
22 in.
Approximate shipping weight, Open;CabCab: 5680 kg
12,522 lb
Weight
Base machine weightFront axle
2180 kg
4806 lb
Rear axle
3500 kg
7716 lb

5680 kg
12,522 lb
Maximum ballast level
Maximum permissible weight10,450 kg
23,038 lb
Capacities
Crankcase oil volume16 L
4.2 U.S. gal.
Fuel tank175 L
46.2 U.S. gal.
Diesel exhaust fluid (DEF) tank19 L
5 U.S. gal.
Cooling system

20 L
5.3 U.S. gal.
Transmission-hydraulic systemPowrQuad Plus/AutoQuad Plus: 60 L
15.9 U.S. gal.
Serviceability
Interval for engine oil change500 hours
Interval for hydraulic/transmission oil change1500 hours
Interval for engine coolant change6000 hours
Loaders
Loader600R
Lift capacity at full heightNon-self-leveling (NSL): 2347 kg
5174.24 lb
Mechanical self-leveling (MSL): 1898 kg
4184.37 lb
Maximum lift heightNSL/MSL: 3.9 m
153.56 in.
Precision AG
GuidanceOptional
TelematicOptional
Remote diagnosticsOptional
Miscellaneous
Side slope rating
Uphill/downhill slope rating
Country of manufactureGermany

Accessories and Attachments

Ag Management Solutions

Cab Equipment

Inside rear mirror
Rear mirrorRear mirror
View from rear mirrorView from rear mirror

The additional rear view mirror is installed on the right-hand side of the rear window. When the window is open, the mirror provides an excellent view of the swinging drawbar and rear-end attachments.  The mirror is adjustable for individual operators.

Bottle-/ Cup-Holder - BL15522

Inner Rear View Mirror - BL16005

JD-Logo for Rear Window - BL15295

Cold Start Packages

Cold Start Package - BL15427

Cold Start Package - BL15431

Fuel Heating Device - BL15539

Upgrade Powerquad+ To Autoquad+ - BL15288

Cold Weather Packages

Electrical Equipment

3-Terminal Socket For SAE - AL203919

Electrical power accessories
Electrical power strip on 6R TractorElectrical power strip on 6R Tractor
#

An electrical power strip provides six additional outlets for powering monitors or other electrical equipment.

 

Three different adapters may be ordered separately through Parts.

  • The 3-ft electrical cord is used for hardwiring electrical components to be used with the power strip. The power strip end has a standard connector.
  • The three-way convenience adapter allows three pin electrical connections to be adapted for use with the power strip.
  • The cigar lighter outlet adapter can be used for plugging in items such as car charges for cell phones or MP3 players. It does not include a lighter.

Front Axle

Hub Extension 219mm, Front, Tread Adjustment - BL15107

To achieve greater flexibility in tread widths with flanged axles, the following rear spacers are available.  The front wheel spacer is only available on 6030 and 6030 Premium Series Tractors with MFWD. Not compatible with high-clearance configurations.

Front: 60 mm (2.36 in.) MFWD
Front: 60 mm (2.36 in.) MFWDFront: 60 mm (2.36 in.) MFWD

This spacer allows tread adjustment where repositioning of the disc within the rim does not provide the required setting. Increased tread setting from 79.4 in. (2016 mm) to 84.1 in. (2134 mm).

 

NOTE: Only for use on 6030 and 6030 Premium Series Tractors with MFWD. Not compatible with high-clearance configurations.

Rear: 30 mm (1.18 in.)
Rear: 30 mm (1.18 in.) Rear: 30 mm (1.18 in.)

For increased tread settings from 75.3 in. (1912 mm) to 77.6 in. (1972 mm) with 24 in. or 30 in. tires or from 75.4 in. (1916 mm) to 77.8 in. (1976 mm) with 34 in. tires.

Rear: 44 mm (1.73 in.)
Rear: 44 mm (1.73 in.) Rear: 44 mm (1.73 in.)

For increased tread settings from 1916 mm (75.4 in.) to 2004 mm (78.9 in.) order the following part.

Rear: 111 mm (4.37 in.)
Rear: 111 mm (4.37 in.)Rear: 111 mm (4.37 in.)

For maximum tread settings, to extend from 75.3 in. (1912 mm) to 84.0 in. (2134 mm) with 24 in. or 30 in. tires, or from 75.4 in. (1916 mm) to 84.2 in. (2138 mm) with 34 in. tires.

Hub Extension 94mm, Front, Tread Adjustment - BL15106

Front Power Take-off (Pto)

Lighting

1 Work Light H3, On Beacon Light Bracket - AL205916

Extremity lights preparation kit
Extremity lightsExtremity lights

The extremity lights provide enhanced visibility during transport and comply with the American Society of Agricultural Engineers (ASAE) standard for lighting and marking.

 

Each lighting arm has a working position, a storage position, and a breakaway feature. These features allow the operator to position the lights to the most desirable location for maximum effectiveness. The design minimizes reflection in the cab.

 

 

NOTE: See the parts catalog and installation instructions for additional required components.

Miscellaneous

Activated Carbon Filter - AL158986

Lockable Filler Cap DEF-Tank - AL211572

Custom key door locks
Custom key door lock kitCustom key door lock kit

Field-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.

Operator''s Station

Bracket for Monitor - BL15158

Sun-glare prevention

A sun visor and a front and rear roller blind are available for improved operator visibility on sunny days, by blocking the sun's bright light and reducing glare.

 

NOTE: Not available with low-clearance cab

Power Beyond

Radio

Rear Axle

To achieve greater flexibility in tread widths with flanged axles, the following rear spacers are available.  The front wheel spacer is only available on 6030 and 6030 Premium Series Tractors with MFWD. Not compatible with high-clearance configurations.

Front: 60 mm (2.36 in.) MFWD
Front: 60 mm (2.36 in.) MFWDFront: 60 mm (2.36 in.) MFWD

This spacer allows tread adjustment where repositioning of the disc within the rim does not provide the required setting. Increased tread setting from 79.4 in. (2016 mm) to 84.1 in. (2134 mm).

 

NOTE: Only for use on 6030 and 6030 Premium Series Tractors with MFWD. Not compatible with high-clearance configurations.

Rear: 30 mm (1.18 in.)
Rear: 30 mm (1.18 in.) Rear: 30 mm (1.18 in.)

For increased tread settings from 75.3 in. (1912 mm) to 77.6 in. (1972 mm) with 24 in. or 30 in. tires or from 75.4 in. (1916 mm) to 77.8 in. (1976 mm) with 34 in. tires.

Rear: 44 mm (1.73 in.)
Rear: 44 mm (1.73 in.) Rear: 44 mm (1.73 in.)

For increased tread settings from 1916 mm (75.4 in.) to 2004 mm (78.9 in.) order the following part.

Rear: 111 mm (4.37 in.)
Rear: 111 mm (4.37 in.)Rear: 111 mm (4.37 in.)

For maximum tread settings, to extend from 75.3 in. (1912 mm) to 84.0 in. (2134 mm) with 24 in. or 30 in. tires, or from 75.4 in. (1916 mm) to 84.2 in. (2138 mm) with 34 in. tires.

Hub Extension 219mm, Rear, Tread Adjustment - BL15128

Front and rear wheel spacers

To achieve greater flexibility in tread widths with flanged axles, the following rear spacers are available.  The front wheel spacer is only available on 6030 and 6030 Premium Series Tractors with MFWD. Not compatible with high-clearance configurations.

Front: 60 mm (2.36-in.) MFWD
Front: 60 mm (2.36-in.) MFWDFront: 60 mm (2.36-in.) MFWD

This spacer allows tread adjustment where repositioning of the disc within the rim does not provide the required setting. Increased tread setting from 79.4 in. (2016 mm) to 84.1 in. (2134 mm).
 
NOTE: Only for use on 6030 and 6030 Premium Series  Tractors with MFWD. Not compatible with high-clearance configurations.

Rear: 30 mm (1.18-in.)
Rear: 30 mm (1.18-in.)Rear: 30 mm (1.18-in.)

For increased tread settings from 75.3 in. (1912 mm) to 77.6 in. (1972 mm) with 24 in. or 30 in. tires or from 75.4 in. (1916 mm) to 77.8 in. (1976 mm) with 34 in. tires.

Rear: 44 mm (1.73-in.)
Rear: 44 mm (1.73-in.)Rear: 44 mm (1.73-in.)

For increased tread settings from 1916 mm (75.4-in.) to 2004 mm (78.9-in.) order the following part.

Rear: 111 mm (4.37-in.)
Rear: 111 mm (4.37-in.)Rear: 111 mm (4.37-in.)

For maximum tread settings, to extend from 75.3-in. (1912 mm) to 84.0-in. (2134 mm) with 24-in. or 30-in. tires, or from 75.4-in. (1916 mm) to 84.2-in. (2138 mm) with 34-in. tires.

Hub Extension 94mm, Rear, Tread Adjustment - BL15127

Rear Fenders

Rear Fender Extension 100X20 - BL15293

Rear Fender Extension 110X15 - BL15292

Rear Power Take-off (Pto)

Seat

Backrest Extension for Operator Seats - AL204297

Suspension For Instructional Seat - AL173570

Instructional seat
6R instructional seat6R instructional seat
#

For an instructional seat to train new operators or diagnosing machine problems, an instructional seat is available as a factory-installed or field-installed attachment.

 

The seat mounts on the inside fender wall and can be folded out of the way when not in use. All instructional seat kits come complete with a seat belt.

 

CAUTION: The instructional seat has been approved only for training operators or diagnosing machine problems. Keep all other riders off the tractor and equipment. Always wear your seat belt.

Selective Control Valves

ISO-A Coupler for Power Beyond - BL15737

Oil Return Coupler - BL15735

Transmission

Transmission backup alarm kit on 6030 SeriesTransmission backup alarm kit on 6030 Series

To better accommodate governmental or commercial sales, a back-up alarm is available as a factory- or field-installed attachment on select models. An alarm sounds whenever the transmission is placed in reverse providing a high level of warning that the tractor is changing direction.

Wheels And Tires